K2 Series 4.0-5.0 Ton Lithium Battery Forklift
Available in 4.0-4.5-5.0t, this forklift will allow you to benefit from the high stability, performance and environmental adaptability of a IC forklift while benefiting from the exceptional qualities in terms of ecology and environmental protection of an lithium battery forklift.Forklift with a high voltage battery of 153.6V unlike the other models which are generally around 80V. Significantly improved overall energy efficiency by increasing motor power and reducing motor and controller current.
Permanent magnet synchronous motor, lighter mass than the three-phase motor of the same energy.
Versatile and efficient, this forklift will meet all the needs of its user thanks to its different performance modes which adapt to all situations and working conditions encountered.
Standard Load detection system on this machine which allows significant energy savings during operations.
Liquid cooling system and heat dissipation as Standard.
Safety and voltage protection system: Short circuits, protected and isolated, the voltage does not exceed 76.8V when the key is disconnected, the maintenance button is pressed or when there is a problem in the system.
Other: Color screen with real-time information, Automatic reduction of truck speed during turns, OPS system (travel+lift+tilt+accessory) Standard, USB port, etc…
Environment Friendliness
- 4-5t = 153.6V/230Ah
Lithium battery Option
- zero emission
- low noise
- free of heavy metals
- no corrosion
- no acid mist volatilization
Maintenance Free
- unnecessary of fluid adding and dust proofing
- daily maintenance free
- manual maintenance free
Long Service Life
- Over 75% capacity reserved after 4000 shifts operation
- Longer service life than lead-acid battery in equal working condition
- 5 years or ten thousand hours quality guarantee for high performance lithium battery assembly
High Efficiency and Energy Saving
- 2hours charging meet 6-8 hours working demand /li>
- High-energy density, self-discharging rate lower than 1% per month
- 95% energy conversion rate, superior charging and discharging performance
- Flexible to charge, easy to operate, no impact on battery life
- Unnecessary to change battery, cost saving & operation safety
Technical Parameters
Models covered: CPD40 (4.0 t), CPD45 (4.5 t), CPD50 (5.0 t). Values shown are for standard configurations; mast/attachment choices may change some dimensions and performance.
| Parameter | CPD40 4,000 kg |
CPD45 4,500 kg |
CPD50 5,000 kg |
|---|---|---|---|
| Rated Capacity (Q) | 4,000 kg | 4,500 kg | 5,000 kg |
| Load Center (C) |
500mm
|
||
| Drive / Power | Electric (Li-ion) • 3-wheel counterbalance • AC systemCompact | ||
| Battery Voltage / Capacity (options) | 77 V / 600–700 Ah | ||
| Controller / Control Mode | Curtis / ZAPI controller • AC power control | ||
| Travel Speed (laden / unladen) | ≈ 14 / 15 km/h | ≈ 13.5 / 14.5 km/h | ≈ 13 / 14 km/h |
| Lift Speed (laden / unladen) | ≈ 0.30 / 0.38 m/s | ≈ 0.28 / 0.36 m/s | ≈ 0.27 / 0.35 m/s |
| Lowering Speed (laden / unladen) | ≈ 0.40 / 0.40 m/s | ||
| Max. Drawbar Pull | ≈ 25,000 N | ||
| Max. Gradeability (laden) | Up to 15% | ||
| Turning Radius | ≈ 2,150 mm | ≈ 2,180 mm | ≈ 2,200 mm |
| Motors (drive / lift) | Drive ≈ 12 kW • Lift ≈ 15 kW | ||
| Service / Parking Brake | Electro-hydraulic / Automatic parking | ||
| Tyres | Solid: Front 28×9-15 • Rear 18×7-8 | ||
| Standard Lift Height | 3,000 mm (standard mast); optional 2-stage & 3-stage masts available | ||
| Overall Length (to fork face) | ≈ 2,695 mm | ≈ 2,700 mm | ≈ 2,705 mm |
| Overall Width | ≈ 1,590 mm | ≈ 1,590 mm | ≈ 1,590 mm |
| Overhead Guard Height | ≈ 2,490 mm | ≈ 2,490 mm | ≈ 2,490 mm |
| Mast Tilt (F/B) | 6° / 12° | ||
| Convenience & Uptime | Fast charging compatible • LCD display • Ergonomic control handle | ||
| Safety Aids | Emergency reverse • Overload protection • Hour meter | ||
